User Instruction - S&P EDM-100 Manual

ENGLISH
EN
EDM AXIAL EXTRACTORS
The EDM range extractors have been ma-
nufactured to the rigorous standards of
production and quality as laid down by the
international Quality Standards ISO 9001.
All the components have been checked and
all the fi nal products have been tested at the
end of the manufacturing process.
We recommend you to check the following
when receiving this product:
• That it is the correct model.
• That the details on the rating label are
those you require: voltage, frequency...
The installation mus be in accordance with
the electrical standards in force in your
country.

USER INSTRUCTION

This appliance can
be used by children
aged from 8 years
and above and per-
sons
physical, sensory or
mental
or lack of experien-
ceand knowledge if
they have been given
supervision or ins-
12
with reduced
capabilities
truction
use of the appliance
in a safe way and un-
derstand the hazards
involved.
shall not play with the
appliance.Cleaning
and user maintenan-
ce shall not be made
by children without
supervision.
INSTALLATION
IMPORTANT: Before installing and wiring
the EDM, ensure that the main supply is
disconnected.
Fig.1:
1. Protection grille
2. Cable entry
3. Connection cover
4. Fixing screw
5. Connection terminals
6. Outlet
7. Slot
The EDM can be installed on wall or ceiling,
and the discharge can be made direct to the
outside or to a ducting (indivifual or shunt,
Fig. 2).
The hole to be made on the wall or the
ceiling must have the following diameter
concerning
Children