Table of Contents
Advertisement
USING A PROGRAM
Before Blending always ensure the Blender Jug is installed correctly,
the Lid is securely on and there are ingredients in the Blender Jug ready
to Blend.
1. There are 3 Pre-set Programs. To select rotate the Speed Dial
anti-clockwise to the desired Program.
2. Press Pulse/ On/ Off to start the program. During operation the
indicator light will turn WHITE.
3. When the Program is complete the indicator light will turn RED. Wait
until the indicator light turns RED before removing the Blender Jug.
4. If required, the program can be stopped at any time by pressing
Pulse/ On/ Off button.
5. After the program has finished return the Speed Dial to the OFF
position.
3 PRE-SET PROGRAMS
Pre-set Program
Symbol
Program
Description
Increases to Speed 7 in 7s
Increases to Speed 10 in 3s,
then keeps at this speed
Soup
until finished.
Total Run Time: 8min
Speed 10 for 30s, Stop 2s
Vegetable/
Speed 6 for 10s, Stop 2s
Fruit
Speed 10 for 60s, Stop 2s
Smoothies
Speed 6 for 10 seconds.
Total Run Time: 1min, 56s
Soft start to Speed 10 for
Cocktail/
8s, Stop 2s.
Liquid
Repeats this cycle until
Drink
finished.
Total Run Time: 30s
Description
Good for creamy vegetable
soup.
CAUTION: After this
program 1L of soup will be
boiling hot.
Ensure lid and measuring
cup are securely attached
to avoid scalding due to
splashes of hot liquid.
Good for general
vegetable/ fruit smoothies
to totally emulsify the
ingredients into a fine and
smooth texture.
This shorter program is
good for various cocktails
and liquid drinks.
INSTALLATION AND OPERATING INSTRUCTIONS 9
Advertisement
Table of Contents
