Operating Tips - Pro-Line Boats BL-122 User Manual

OPERATING TIPS

The Pro-line Blender is a great addition to any kitchen, allowing simple
and quick preparation of drinks, purees, sauces and soups. The more
familiar you are with your Pro-line Blender the easier preparing dishes
will be. Below are some tips that will help you get started.
• For best results pour liquids and soft ingredients into the blender
jug fi rst followed by the harder ingredients such as ice cubes, leafy
greens.
• When making sauces, stuff ings or processing nuts, put in between
2 and 3 cups of ingredients (as per the markings on the Blender Jug).
The amount needs to be neither too large or too small.
• Keep the blending time below 2 minutes to prevent any burning smell
due to overheating. Too large a quantity of ingredients may lead to
overloading and overheating of the motor. In this case, wait until the
motor temperature falls before operating again.
• When blending thick or sticky ingredients always start at low speed
before increasing to high speed. If there is no rotation of the blades
disconnect the power and stir the contents.
• Do not overload the unit nor add too litt le ingredients.
10 INSTALLATION AND OPERATING INSTRUCTIONS
• To prevent spillage, do not put liquid in blender jug exceeding the
MAX line.
• To avoid leaks place the lid fi rmly on the Blending Jug.
• Blender Jug components come pre-assembled and should not be
disassembled.
• The Blender cannot be operated if:
- The Blender Jug is not correctly seated on the base,
- The Speed Dial is turned to variable speed before the jug is
positioned onto the base,
- The Blender Jug is removed during operation and put back again.
To resolve the above and reset the Blender, turn the Speed Dial back to
the OFF position and ensure the Blender Jug is correctly positioned on
the Base.