Table of Contents
Advertisement
Maintenance
5. Maintenance
Product Maintenance
Dust build-up can cause overheating and mechanical wear. To maintain optimum performance and
minimize wear, clean all products at least twice a month. However, be aware that usage and environmental
conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1.
Unplug the product from power.
2.
Wait until the product is at room temperature.
3.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
4.
Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5.
Apply the solution directly to a soft, lint-free cotton cloth or a lens-cleaning tissue.
6.
Softly drag any dirt or grime to the outside of the transparent surface.
7.
Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Cosmos HP User Manual Rev. 1
13
Advertisement
Table of Contents
