Additional Safety Warnings; Intended Use - Bosch GTR55-85 Operating/Safety Instructions Manual

Do not hold the vacuum hose against any body parts dur-
ing operation. Static electricity build-up in the hose during
operation may result in static shock.
GFCI and personal protection devices like electrician's rubber
gloves and footwear will further enhance your personal safety.
Do not use AC only rated tools with a DC power supply.
While the tool may appear to work, the electrical components
of the AC rated tool are likely to fail and create a hazard to the
operator.
Develop a periodic maintenance schedule for your tool.
When cleaning a tool be careful not to disassemble any
portion of the tool since internal wires may be misplaced
or pinched or safety guard return springs may be improp-
erly mounted. Certain cleaning agents such as gasoline, car-
bon tetrachloride, ammonia, etc. may damage plastic parts.
Use this tool only as intended. Un-
intended use may result in personal
injury and property damage.
The power tool is intended for dry sanding dry wall that has
had drywall plaster applied to close seams and blemishes,
ceilings and walls in indoor and outdoor areas, and for remov-
ing coats of paint, adhesive residues and loose plaster.
This power tool is not suitable for bench-mounted use. It
must not be clamped into a vice or fastened to a workbench.

Additional Safety Warnings

other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other
masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles.

Intended Use

SAVE THESE INSTRUCTIONS
-6-
Some dust created by power sand-
ing, sawing, grinding, drilling, and