Pairing With Siemens S55, S56; Learning Names In The Ck3000; Siemens Communicating; Making A Call Using Voice Recognition - Parrot CK3000 User Manual

ENGLISH

PAIRING WITH SIEMENS S55, S56

When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your
Parrot CK3000. Once this is done, connection between your telephone and your hands-free kit will take place automatically
as soon as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is
established.
Procedure :
Go to Menu, ? Settings and confirm with "Select".
? "Mod/Data", confirm with "Select", ? "Bluetooth®", and click on "Options".
If Bluetooth® is activated, "BT activated" is displayed.
If Bluetooth® is deactivated, "Activate BT" is displayed. "Select" to activate this function.
? Search and confirm with "Access". Wait until:
"1 Found", followed by "Parrot CK v..." are displayed, confirm with "Select".
«Enter BT Pin for Parrot CK» is displayed, enter 1234, press "Select"
«Hands-free trusted» is displayed to indicate that the pairing has been completed successfully.
IMPORTANT : If the phone does NOT display the message "Handsfree trusted" at the end of the pairing procedure, this
procedure have to be repeated again. You should start with a memory erasing of the CK3000 by pressing both buttons for
2 seconds and the erasing of the paired device in the list of "Known devices" in the "Bluetooth®" menu.

LEARNING NAMES IN THE CK3000

Attention : If you prefer to use the voice recognition of your phone (limited to 15 voice tags), don't follow this procedure and
record your voice tags directly from your phone menus.
Hold the red button : your directory is displayed on the handset screen.
Select a name and click on "Select". Follow the vocal prompts.
COMMUNICATING

Making a call using voice recognition:

Press the green key briefly, [Beep], and then say a name
Example: Press the green key [CK3000 beeps, telephone beeps], Nicolas.
Making a call manually:
Dial the number directly on the handset ; Press the green button to switch the conversation to hands-free mode.

To redial last number called:

To redial the last number called, hold the green button
Answering a call:
Press the green button if you want to pick-up the incoming call.
Press the red button if you do not want to receive the incoming call. It will be forwarded to your voice mail.
Dual call:
A second call waiting is indicated by beeps from the speakers.
There are two possible reactions:
1. Pressing the green button will take the second call. Pressing this button again lets you toggle between the two
calls. Pressing the red button ends both calls.
2. Pressing the red button ends the first call. You will then hear the second call ring through the speakers and
pressing the green button lets you take that call.
Adjusting the volume:
Use the keys on the handset to adjust the volume of the conversation.
SIEMENS
7