Advertisement
Do not touch the sharp blades – Keep the blade assembly
away from children.
Never remove the mill until the blades have completely
stopped.
The appliance will not work if the mill is incorrectly fitted.
Do not process hot ingredients in the mill allow to cool down
to room temperature before processing.
Mini Chopper/Mill
The processing of spices is not recommended as they may
damage the plastic parts.
Grinding Mill
Do not process dried turmeric root as it is too hard and may
damage the blades.
Slicing/Grating Discs
The discs are very sharp; handle with care when fitting,
removing and cleaning.
Always hold by the finger grip away from the cutting edge
when handling the sharp cutting blades, emptying the bowl
and during cleaning.
Never use your fingers to push food down the feed tube. Only
use the pusher supplied.
Before removing the lid, switch off wait until the cutting disc
has completely stopped.
Cleaning
Wipe the power unit with a damp cloth, then dry. Ensure that
the interlock area
Do not immerse the power unit or blade assemblies in water.
The bowl, lid, pusher and all attachments/tools apart from
the blade assemblies are suitable for both handwashing and
dishwashing.
The blade assemblies should be brushed clean and rinsed
under running water.
Before plugging in
Make sure your electricity supply is the same as the one shown on the underside of your appliance.
Important – Plug and Fuse Information
The wires in the cord are coloured as follows:
Blue = Neutral
Brown = Live
If the plug supplied with your appliance has a fuse fitted and the fuse fails it must be replaced with one of
the same rating.
If the plug or cord requires replacing a new cord set should be fitted by an Authorised Kenwood Repairer.
Note:
For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost
then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by
colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).
If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise
if an unwanted non-rewireable plug is inadvertently inserted into a socket outlet.
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into
contact with food.
is clear of food debris.
4
Advertisement
