Canon PIXMA TS300 Series Replacing page 2

3/21/23, 1:42 PM
Note
For Windows, if a FINE cartridge runs out of ink, you can print with either color or black
FINE cartridge, in whichever ink remains, only for a while. However the print quality may
be reduced compared to when printing with both cartridges. We recommend to use a
new FINE cartridge in order to obtain optimum qualities.
Even when printing with one ink only, print with leaving the empty FINE cartridge
installed. If either of the color FINE cartridge or black FINE cartridge is not installed, an
error occurs and the printer cannot print.
For information on how to configure this setting, see below.
Setting the FINE Cartridge to be Used
Color ink may be consumed even when printing a black-and-white document or when
black-and-white printing is specified.
Both color ink and black ink are also consumed in the standard cleaning and deep
cleaning of the print head, which may be necessary to maintain the performance of the
printer. When ink runs out, replace the FINE cartridge immediately with a new one.
Ink Tips
1.
Make sure that the power is turned on.
2.
Retract the paper output tray and the output tray extension.
3.
Open the cover.
The FINE cartridge holder moves to the replacement position.
Caution
Do not hold the FINE cartridge holder to stop or move it forcibly. Do not touch the
FINE cartridge holder until it stops completely.
Important
The inside of the printer may be stained with ink. Be careful not to stain your
hands or clothing when replacing the FINE cartridge. You can easily wipe off the
ink from the inside of the printer with tissue paper or the like.
https://ij.manual.canon/ij/webmanual/Manual/All/TS300 series/EN/UG/ug_in_01_c.html
Canon : PIXMA Manuals : TS300 series : Replacing a FINE Cartridge
2/6