Pantech Breeze II User Manual page 79

Pantech breeze ii: user guide
Hide thumbs Also See for Breeze II:
Table of Contents

Advertisement

Alert message
If you experience any problem while using your
mobile phone, please refer to the following
checklist. If the problem still persists, contact
your dealer or nearest carrier.
When the "Insert SIM Card" message
appears:
Make sure the SIM card is correctly installed.
Check to see if the SIM card is working properly.
If it does not work, try to clean the contact
points of the card with a dry cloth. If it is out of
order, take it to your service provider.
When the "Messages full" message appears:
The received or saved messages are full in
your phone memory. You need to delete the
message.
When the "Phone and SIM messages is full.
Delete Messages" message appears:
The received or saved messages are full in your
phone and SIM card memory. You need to
delete the message.
When the "Password" message appears in
Phone locked state:
Enter the phone password. The default
password is"1234". If you cannot remember the
password, contact the nearest carrier.
When the "Enter PIN1" message appears:
Input PIN1. If you cannot remember it, contact
your service provider. You can still receive calls
even if your mobile phone becomes locked
after entering the incorrect PIN1 on three
consecutive attempts.
When the "No Service" or "Network Search"
appears:
If you cannot make/receive a call when you
are indoors or undergrounds where the signal
strength is poor, move toward a window or go
out to an open area. If you still cannot make a
connection, contact your service provider.
Troubleshooting checklist
When audio quality is poor:
End a call and try again.
When the other party cannot hear you
speaking:
Your phone may be set to MUTE. Disable the
MUTE function. Or your hand may be covering
the microphone located below the # key.
Appendix
When battery lifetime is shorter than usual:
This may happen when you are in an area
with low signal strength. Turn off your phone
when it is not in use. Change the battery when
battery energy is exhausted.
When your mobile phone does not turn on:
Make sure your battery is charged. Check to
see if your phone works while recharging the
battery.
When you are unable to send a message:
Either you are not registered to receive an SMS
service, or you may be in an area where your
network service provider cannot provide such
a service.
When you are unable to make a call:
Your phone may be set to " Fixed Dialing
01
02
03
04
05
06
01
02
03
04
05
06
07
157
157

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Breeze ii p2000

Table of Contents