Netusb Printing Using Auto-Connect Printer - Sitecom LN-308 Full Manual

Please check www.sitecom.com
•
Please follow the user manual of the USB device to install its driver. For example, you may
put the driver CD of the USB device in the CDROM player to install the driver.
•
When you are asked to plug in the USB device into PC's USB port, click the desired USB
device in the Control Center and then click the "Auto-Connect Printer" button to do the
connect operation and get the ownership of the USB device. The computer name of the
device owner will be shown at the end of the device.
•
PC will automatically detect that the USB device is plugged-in. On the right side of the
Windows Task Bar, you can see the information of the new device. Continue to follow the
user manual of the USB device to do the rest jobs of installation, until the driver installation
has finished.
After the installation, you can see the newly created devices on the PC. If the USB device is a MFP,
you can see a new printer and a new scanner from the "Control Panel".

7.3.2 NetUSB Printing using Auto-Connect Printer

After the driver is installed, you can see a newly created printer in the Control Panel. Follow the
steps below to perform NetUSB printing.
• In the Control Center, click the MFP server that has the desired printer (or MFP) attached.
• Click the desired printer (or MFP).
•
Click the "Auto Connect Printer" button and choose "Set Auto-Connect Printer". The following
figure will appear.
for up to date drivers & utilities, manuals and support