DFI NS30-TC User Manual page 69

3.1.4.4 IDE HDD Block Mode
Enabled The IDE HDD uses the block mode. The system BIOS
will check the hard disk drive for the maximum block
size the system can transfer. The block size will depend
on the type of hard disk drive.
Disabled The IDE HDD uses the standard mode.
3.1.4.5 Init Display First
This field is used to select whether to initialize AGP or PCI first
when the system boots.
AGP
PCI Slot
3.1.4.6 AGP Auto Calibration
When the AGP Auto Calibration function is enabled, it allows the
system to automatically calibrate the AGP's performance. We
recommend that you leave this field in its default setting - Enabled.
When the system boots, it will first initialize AGP.
When the system boots, it will first initialize PCI.
Award BIOS Setup Utility
3
69