The performance of the valve is checked
G
at the factory (the valve may still contain
"residual water").
8.3
Storage
Store the valve free from dust and
G
moisture in its original packaging.
Avoid UV rays and direct sunlight.
G
Maximum storage temperature: 40 °C.
G
Solvents, chemicals, acids, fuels or
G
similar fl uids must not be stored in the
same room as valves and their spare
parts.
8.4
Tools required
The tools required for installation and
G
assembly are not included in the scope
of delivery.
Use appropriate, functional and safe
G
tools.
9
Functional description
The GEMÜ N082 and N182 pressure
reducers ensure that a constant outlet
pressure is maintained in process plant
utilizing the pressure differential. If the
pressure rises on the outlet side, the spring
force is lower and the valve closes as the
spring is raised. The pressure is reduced
until the spring force and the outlet pressure
are the same. If the pressure falls, the valve
opens as the spring force presses against
the diaphragm surface via the control
aperture. The outlet pressure can be read
off a diaphragm-protected pressure gauge
and the spring force adjusted using a set
screw as required.
10
Construction
2
1
16
Construction GEMÜ N082, N182
1
Valve body
2
Valve bonnet
3
GEMÜ 082: Diaphragm
GEMÜ 182: Piston with O-ring
14
Cap
16
Valve bottom with O-ring
21
Pressure gauge
10.1
Type plate
Device version
Design in accordance with order data
Traceability number
Item number
The month of manufacture is encoded in
the traceability number and can be obtained
from GEMÜ.
The product was manufactured in Germany.
25 / 36
Device-specific data
12103529 I 0001
Serial number
N082, N182
14
3
21