Table of Contents
Advertisement
9 Manufacturer's information
9 Manufacturer's information
9.1 Delivery
● Check that all parts are present and check for any damage
immediately upon receipt.
The product's performance is tested at the factory. The scope
of delivery is apparent from the dispatch documents and the
design from the order number.
Control
Function
function
1
Normally closed (NC)
9.2 Packaging
The product is packaged in a cardboard box which can be re-
cycled as paper.
9.3 Transport
1. Only transport the product by suitable means. Do not drop.
Handle carefully.
2. After the installation dispose of transport packaging ma-
terial according to relevant local or national disposal regu-
lations / environmental protection laws.
9.4 Storage
1. Store the product free from dust and moisture in its ori-
ginal packaging.
2. Avoid UV rays and direct sunlight.
3. Maximum storage temperature: 40 °C
4. Do not store solvents, chemicals, acids, fuels or similar
fluids in the same room as pulsation dampers and their
spare parts.
GEMÜ 652
Condition as supplied
to customer
closed
16 / 26
10 Installation in piping
10.1 Preparing for installation
The equipment is subject to pressure!
▶ Risk of severe injury or death.
Depressurize the plant.
●
Completely drain the plant.
●
Corrosive chemicals!
▶ Risk of caustic burns.
Wear suitable protective gear.
●
Completely drain the plant.
●
Hot plant components!
▶ Risk of burns.
Only work on plant that has cooled
●
down.
Maximum permissible pressure exceeded.
▶ Damage to the product.
Provide for precautionary measures against exceeding
●
the maximum permissible pressure
Use as step.
▶ Damage to the product.
▶ Risk of slipping-off.
Choose the installation location so that the product can-
●
not be used as a foothold.
Do not use the product as a step or a foothold.
●
Leakage
▶ Emission of dangerous substances.
Provide for precautionary measures against exceeding
●
the maximum permissible pressure.
Suitability of the product!
▶ The product must be appropriate for the piping system
operating conditions (medium, medium concentration,
temperature and pressure) and the prevailing ambient
conditions.
WARNING
WARNING
CAUTION
CAUTION
CAUTION
CAUTION
NOTICE
www.gemu-group.com
Advertisement
Table of Contents
