Table of Contents
Advertisement
OPERATIONS OF MECHANISM (MZ-EP11)
When loading a disc
The disc shutter 1 opens when a disc is loaded. (Fig. 1)
≥
When a disc is loaded, the open lever 2 moves in arrow direction
a , and the holder assembly 3 lock is released. (Fig. 1 to 3)
≥
The slider 4 slides in arrow direction b , and the holder assembly
3 moves down to the chassis assembly (below). (Fig. 4)
≥
The OPEN/CLOSE SW (S801) is turned ON by the connection
lever linked. (Fig. 1)
≥
The wakeup mode is set and the power circuit starts operating.
OPEN/CLOSE SW (S801)
Disc shutter 1
Insert the Mini Disc
Descends to chassis side (below)
b
Slider 4
Open lever 2
ON
Slider 4
(Fig. 1)
Holder assembly 3
(Fig. 4)
– 4 –
Lock
Relesse
b
Slider 4
Open lever 2
Insert the Mini Disc
(Fig. 2)
Open lever 2
(Fig. 3)
Advertisement
Table of Contents
