5.2 Recommended Tools
EasySPP
The following requirement must be met:
Microsoft .NET framework (version 4) which can be downloaded from the Microsoft website
Easy SPP is the first step to get familiar with the TCU commands. The issued commands can
be copied and then ported to any microcontroller. HyperTerminal is not recommended to use
because the commands are in binary format.
EasyBLE
This tool has the same intention as the EasySPP and shows some example Bluetooth LE
profiles e. g. heart rate sensor. It can be used together with various of the shelf apps running on
iPhone and Android phones supporting Bluetooth 4.0. One example is "Wahoo Utility" which is
available in the Apples iTunes App Store.
EasyBLE documentation includes an application example how to connect PAN1026A USB stick
and an iOS device.
5.3 Development of Applications
Please contact your local sales office for customized development of your individual application
6.2.1 Contact
The following tools are recommended: IAR, J-Link debugger.
The BMSKTOPASM369BT(kc) Starter Kit makes it possible to quickly and easily evaluate
Toshiba's Bluetooth Dual Mode LSI TC35661-5xx in combination with Toshiba ARM
®
Cortex
-M3 MCU as host MCU. It is made to execute the Toshiba Bluetooth Driver software and
debug user application code via an embedded J-Link debugger interface. The TMPM369FDFG
Microcontroller offers embedded Ethernet, CAN, USB host, USB device and RS-232
connectivity.
Starter Kit Content:
•
Toshiba TOPAS369Bluetooth Board
•
Segger J-Link JTAG/SWD Emulator with USB interface
•
J-Link 19-pin Cortex-M Adapter
•
USB Cable
•
Rapid Start-Up Guide
Design Guide Rev. 1.1
Us.
Please note that the individual Mac address is stored in the EEPROM and has
to be loaded into the RAM after each start-up.
PAN1026A Bluetooth Module
5 USB Evaluation Kit
®
Page 16