Turntable System Operating Instructions SL-1210M5G Model No. SL-1200GLD Before connecting, operating or adjusting this prod- uct, please read these instructions completely. Please keep this manual for future reference. RQT7021-1Y...
IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. Keep these instructions. Heed all warnings.
Features A masterpiece amongst turntables with a worldwide repu- tation. Highly accurate turntable speed maintained continuously with a quartz pitch control. •The [±16/±8] button can control a wide range between –8 % and +8 % and –16 % and +16 %.
Putting the player together In order to prevent damage during shipping some of the equipment has been disassembled. Put the player together in the following order. •Do not connect the AC power supply cord until set up is complete. •Leave the dust cover off until set up and adjustments are com- plete.
Connections and installation Connecting to an Audio Mixer (not included) •Disconnect all units from the power source before making any con- nections. •Reconnect the AC power supply cord after all other connections are complete. Unit Earth lead Audio mixer Preparatory adjustments Horizontal balance and stylus pressure Release the tone arm.
Hold the dust cover with both hands and fit it over the player from directly above. Armlift screw SL-1200GLD Place the dust cover in position from directly above, hold- ing it at both sides. For detaching the dust cover, be certain first to raise it as illustrated Armlift before removal.
Playing records Preparation 1. Put a record on the turntable. 2. Take off the stylus cover and release the arm clamp. To temporarily stop play Lift the cue lever. The stylus lifts off the record. Refer to page 9 for fine adjustments to the pitch When using EP records 1.
Adjustments while using the unit Pitch control Fine adjustment to the number of revolutions per minute. Press [reset] to turn off the green LED light. ± ± Press [ 8] to select the pitch. •When [±16/±8] is pressed once (up position), the [±16] pitch indicator lights on the pitch control slider.
For product information or assistance with product operation: In the U.S.A., contact the Panasonic Customer Call Center at 1- 800-211-7262, or the website http://www.panasonic.com/contactinfo, or the website (http://www.panasonic.com/support). In Canada, contact the Panasonic Canada Inc. Customer Care Cen- tre at 905-624-5505, or visit the website (www.panasonic.ca), or an...
In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or the website http://www.panasonic.com/contactinfo, or the website (http://www.panasonic.com/support). In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 905-624-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you.
Page 12
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com 2003 Matsushita Electric Industrial Co., Ltd. Printed in Japan Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”) Ave.