Asus Republic of Gamers GT-AX5400 User Manual page 76

• AMPDU RTS: Enable this function allows to build a group
of frames before they are transmitted and use RTS for every
AMPDU for communication among 802.11g and 802.11b
devices.
• RTS Threshold: Select a lower value for RTS (Request to
Send) Threshold to improve wireless communication in a
busy or noisy wireless network with high network traffic and
numerous wireless devices.
• DTIM Interval: DTIM (Delivery Traffic Indication Message)
Interval or Data Beacon Rate is the time interval before a
signal is sent to a wireless device in sleep mode indicating
that a data packet is awaiting delivery. The default value is
three milliseconds.
• Beacon Interval: Beacon Interval is the time between one
DTIM and the next. The default value is 100 milliseconds.
Lower the Beacon Interval value for an unstable wireless
connection or for roaming devices.
• Enable TX Bursting: Enable TX Bursting improves
transmission speed between the wireless router and 802.11g
devices.
• Enable WMM APSD: Enable WMM APSD (Wi-Fi Multimedia
Automatic Power Save Delivery) to improve power
management between wireless devices. Select Disable to
switch off WMM APSD.
• Optimize AMPDU aggregation: Optimize the max
number of MPDUs in an AMPDU and avoid packets get lost
or corrupted during transmission in error-prone wireless
channels
• Airtime Fairness: With airtime fairness, the speed of
the network is not determined by the slowest traffic. By
allocating time equally among clients, Airtime Fairness allows
every transmission to move at its highest potential speed.
• Explicit Beamforming: The client's WLAN adapter and router
both support beam forming technology. This technology
allows these device to communicate the channel estimation
and steering direction to each other to improve download
and uplink speed.
76