NateoSante EOLIS 600 Operating Manual page 19

ON/OFF
Hold down the icon for 3 sec to turn off your EOLIS Air Manager. To turn it back on, press
anywhere on the screen.
Air quality indicator
Indicates your indoor air quality in real time using particle and VOC sensors that measure the level
of particles (PM2.5) and VOCs present in the air. The closer the arrow to the red, the more polluted
your air. These arrows flash during the first 25 sec which represents the time of initialization of the
sensors.
Real filter service indicator
Real filter service indicator for the filter block using measurements made by pressure sensors. The
closer the arrow is to the black section, the more particles your filter block contains. We recommend
that you change your filter block before the indicator reaches the black section.
Speeds
In MANUAL mode, increase the speed by pressing the "+" icon or decrease the speed by
pressing the "-" icon. In total, 5 speeds are available for your purification needs.
Note: Your unit is designed for a precise volume of air. If you do not have a specific problem
(allergies, breathing problems, sudden pollution, etc.), speed 1 is sufficient for continual
purification, at night-time or during the day.
Settings
By pressing the SETTINGS icon, you will have access to the settings you can turn on or off when you like.
Go to the settings menu using the scrolling arrows
To exit this menu, press the icon:
Language
Select the language for your device: French, English, Chinese, etc.
Date & time
Set the date and time using this feature.
Security
This security feature prevents access to the settings, requiring users to enter a pin code that you
select among 4 codes offered by the device. To activate this security feature, press the ON
button, and then press the SECURITY icon and select a pin code from the list. To deactivate this
feature, press the OFF button.
MAKE SURE YOU SAVE THE PIN CODE IN A RELIABLE PLACE SO THAT YOU DO NOT FORGET IT.
Brightness
Adjust the control screen's brightness to 5 different levels of brightness.
Errors
Display the list of unit alerts (malfunctions, filter block to change, etc.). When an error is detected,
your unit warns you by displaying an alert icon on the control panel. Your unit provides you with
solutions or recommendations for fixing the detected problem.
Sleep mode
Put your unit's screen in sleep mode after 30 sec, 2 min, 5 min, or 15 min of inactivity. In sleep
mode, the screen goes dark, and lights back up when you press on it again.
19 - EOLIS Air Manager 600 600S 1200 1200S 19 - EOLIS Air Manager 600 600S 1200 1200S
.
EN EN