Advertisement
QUICK SETUP GUIDE PAN-10500
MOUNTING
2.3 INSTALLATION PROCEDURE
Place and level out the wall bracket,
mark and drill the necessary holes. It
is recommended to use 6 bolts on
both sides of the mounting bracket.
Install the wall bracket using the
included expansion bolts.
A 10mm bit might be required.
With the screen in place always
remember to tighten the M5 security
screws on the bottom of the wall
mount to prevent any security risks.
Product Content & Operation - Version 1.0
Six M8 screws corresponding to
the size of the VESA holes are
used to lock the two vertical bar
hangers on the VESA mounting
holes on the touch screen's
back plate.
Once the wall bracket is installed and
properly secured you may hang the
touch screen. You may adjust the left
and right position once the screen is
in place.
3
Advertisement
