Niche NLCST1418 Assembly Instructions

Lux c-shaped side table

Table of Contents

Download this manual

ASSEMBLY INSTRUCTIONS:

NLCST1418 — Niche Lux C-Shaped Side Table

BEFORE YOU ASSEMBLE:

• Place all parts on a clean, smooth surface to avoid scratching the parts

• Check to be sure you have all parts and hardware

• Remove all wrapping materials, including any staples & packing straps

• Keep all hardware, small parts and packaging out of reach of children

• Do not tighten all screws/bolts until product is completely assembled

PARTS & HARDWARE:

1: 1x Top

2: 1x Base

mynichefurniture.com

3: 1x Leg

4: 1x Support

D: 4x Pegs

Call us at 866-816-9822 or email customerservice@regencyof.com

A: 4x Cam

B: 3x Bolts

Pins

E: 1x Hex Tool

PROBLEMS OR QUESTIONS?

C: 4x Cam

Locks

F: 4x Caps

G: 4x Casters

Table of Contents

Do you have a question about the NLCST1418 and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTIONS: NLCST1418 — Niche Lux C-Shaped Side Table BEFORE YOU ASSEMBLE: • Place all parts on a clean, smooth surface to avoid scratching the parts • Check to be sure you have all parts and hardware • Remove all wrapping materials, including any staples & packing straps •...
Page 2 ASSEMBLY INSTRUCTIONS: NLCST1418 — Niche Lux C-Shaped Side Table STEP 1: STEP 2: Insert 3 Cam Pins (A) into the predrilled holes Insert 4 Casters (G) into the predrilled holes on the face of Top (1). on the face of Base (2).
Page 3 ASSEMBLY INSTRUCTIONS: NLCST1418 — Niche Lux C-Shaped Side Table STEP 5: STEP 6: Attach Top (1) onto the assembled Leg (3) and Support Align Base (2) with the Pegs (D) on the bottom of Leg (3), (4) by lining up the Cam Pins (A) with the predrilled and press down into place.