Table of Contents
Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS:
BEFORE YOU ASSEMBLE:
• Place all parts on a clean, smooth surface to avoid scratching the parts
• Check to be sure you have all parts and hardware
• Remove all wrapping materials, including any staples & packing straps
• Keep all hardware, small parts and packaging out of reach of children
• Do not tighten all screws/bolts until product is completely assembled
• A hammer and slotted screwdriver is required for assembly
PARTS & HARDWARE:
1: 1x Top
7: 1x Back
F: 1x Hex Tool
mynichefurniture.com
NL2SBK — Niche Lux 2 Shelf Bookcase
2: 1x Middle Shelf
A: 4x Screw Pins
H: 15x
Nails
G: 4x Feet
3: 1x Bottom Shelf
B: 8x Bolt
I: 2x Washers
J: 1x Sm. Screw
Call us at 866-816-9822 or email customerservice@regencyof.com
4: 1x Kick Plate
5 & 6: 2x Legs
C: 4x
D: 12x
Cam
Covers
Locks
K: 1x Wall Strap
L: 1x Plug
PROBLEMS OR QUESTIONS?
E: 7x Pegs
M: 1x Lg. Screw
Advertisement
Table of Contents
Related Manuals for Niche NL2SBK
Summary of Contents for Niche NL2SBK
- Page 1 ASSEMBLY INSTRUCTIONS: NL2SBK — Niche Lux 2 Shelf Bookcase BEFORE YOU ASSEMBLE: • Place all parts on a clean, smooth surface to avoid scratching the parts • Check to be sure you have all parts and hardware • Remove all wrapping materials, including any staples & packing straps •...
- Page 2 ASSEMBLY INSTRUCTIONS: NL2SBK — Niche Lux Shelf Bookcase STEP 1: STEP 2: Insert 4 Screw Pins(A) into corners of Top(1) Insert 2 Pegs(E) into each end of Middle Shelf(2) STEP 3: STEP 4: Insert 3 Pegs(E) into Kick Plate(4) Insert 2 Feet(G), 2 Cam Locks(C) & 2 Pegs(E) into each Leg 5 &...
- Page 3 ASSEMBLY INSTRUCTIONS: NL2SBK — Niche Lux Shelf Bookcase STEP 5: STEP 6: Attach Kick Plate(4) to Bottom(3) by aligning peg with hole Attach Bottom Assembly(3,4) and Middle Shelf(2) to Leg(5) by lining up pegs w/ holes (3,4) STEP 7: STEP 8:...
- Page 4 ASSEMBLY INSTRUCTIONS: NL2SBK — Niche Lux Shelf Bookcase STEP 9: STEP 10: Insert pins on Top(1) into holes on each Leg(5,6). Using a Align Back(7) with existing assembly. Using a hammer, slotted screwdriver, tighten Cam Locks by turning arrows attach Back using 15 Nails(H) clockwise until tight.
Need help?
Do you have a question about the NL2SBK and is the answer not in the manual?
Questions and answers