Page 1
AVALIGHT-DH-CAL LIGHT SOURCES Operation and Installation Manual NEED TECHNICAL SUPPORT? Scan the QR-code or visit www.avantes.com/support We are happy to help you!
Page 2
This document is protected by copyright. Do not copy or publish this document or parts of it without written permission of Avantes BV. Product specifications and descriptions in this manual are subject to change without notice. Avantes BV will not be responsible for errors and omissions in this manual or for direct or incidental damages in connection with the use of this device or information.
(xxx.lmp) that come with it. As a service the AvaLight-DH-CAL comes with a cosine corrector with SMA adapter. You can use this or your own to calibrate your irradiance system. Note: This cosine corrector should not remain in the lamp after calibration! There are two calibration files, both valid for calibration with the cosine corrector.
Page 6
The power connector for 100-240 VAC is located on the rear of the AvaLight-D(H)-S. Be careful to use it with a designated power range only, please use the included power cord with the instrument. For UK, US and Australian power cords, please contact Avantes Technical Support. The 2 fuses are 1A slow blowing fuses.
AvaLight-DH-CAL-ISP30 NIST traceable UV/VIS deuterium/halogen light source for use with AvaSphere-30-IRRAD, incl. special sphere holder bottom plate AvaLight-DH-CAL-ISP50 As AvaLight-DH-CAL-ISP30, but for use with AvaSphere-50-IRRAD AvaLight-DH-CAL-ISP80 As AvaLight-DH-CAL-ISP30, but for use with AvaSphere-80-IRRAD DH-Recal AvaLight-DH-CAL reclibration service (200 – 1099...
Changing the light bulb Since this light source is calibrated, the bulb exchange and recalibration can only be done in our calibration lab. Please note: the AvaLight-DH-CAL cannot be used as a light source for standard reflection/absorption spectroscopy. Getting help...
Need help?
Do you have a question about the AVALIGHT-DH-CAL and is the answer not in the manual?
Questions and answers