Summary of Contents for BC Strength BC BOX
- Page 1 BC BOX ASSEMBLY INSTRUCTIONS Thank you for your purchase. Please read these instructions carefully prior to assembling the BC Box.
- Page 2 PARTS Tools required (not included): Phillips Screwdriver *We recommend using a drill or impact screwdriver to speed up the process when securing the screws. 12 INCH BOARD (x2) 14 INCH BOARD (x2) BASE FRAME FOOT PLATE SCREWS (x72) 16 INCH BOARD (x2) bcstrength.com | bcstrength.co.uk | bcstrength.com.au...
- Page 3 ASSEMBLY INSTRUCTIONS STEP 1 Lay one of the 12 inch boards (Part A) flat on the ground with logo facing down. STEP 2 Line up the 16 inch board (Part C) with the logo facing out. Repeat on other side. STEP 3 Lay the other 12 inch board on top of 16 inch boards (Part C) parallel to other 12 inch board (Part A) with the logo facing up.
- Page 4 ASSEMBLY INSTRUCTIONS STEP 4 Flip unit on the side and push in the 14 inch board (Part B) with the logo facing outwards. Now flip unit to the other side and repeat. STEP 5 Using the screws (Part D) fasten the box together. Make sure all joints are snug before screwing together and make sure not to over tighten the screws.