Specifications - Strong SRT32HF2003 User Manual

Problem Possible cause and solution
The remote control
does not work
The TV switches off Switch ON the TV and check settings for automatic STBY function, by default the TV switches OFF after 4
after a certain time hours to fulfil European low power regulations and help you to save energy.
NOTE:
If the problem persists after these solutions, please contact your local support centre or send a support mail via our
website www.strong.tv.

8.0 SPECIFICATIONS

Audio
Audio Output:
Video
DVB-T:
Input impedance:
Channel Bandwidth:
Modulation:
Video System:
Sound System:
System:
Connectors 32"
1x ANT IN 1x SAT IN
2x HDMI
1x USB
1x S/PDIF (optical)
1x AV IN
1x COMMONINTERFACE (CI)
Connectors 40"
1x ANT IN 1x SAT IN
3x HDMI
2x USB
1x S/PDIF (optical)
1x AV IN
1x COMMONINTERFACE (CI)
1x Headphones
General Data
Operating voltage:
Power consumption:
Operating temperature:
Storage temperature:
Operating humidity:
Storage humidity:
Dimensions (WxHxD) in mm:
Net-weight:
1. hange the batteries. If you're using rechargable ones take care to use such with low self-
discharge
2. The batteries are not installed correctly or the types have been mixed
3. IR Sensor is blocked or maybe interfered from bright light
32": 5W
40": 8W
Reception range: VHF (174MHz ~ 230MHz), UHF (474MHz ~ 862MHz)
75Ω
7MHz/8MHz
DVB-T: COFDM 2K/8K QPSK,16QAM,64QAM
DVB-S/S2: QPSK ,8PSK
DVB-T2: QPSK,16QAM,64QAM,256QAM
DVB-C: 16QAM, 32QAM, 64QAM, 128QAM, 256QAM
MPEG-2 MP@ML, MPEG-2 MP@HL, H.2 Main/Main- 10 profile, @L4.1, Support 8-bit/10-bit color
depth, 1920x1080@60fps
MPEG-1 layer 1/2
DTV: DVB-T2, DVB-S2, DVB-C, DVB-T, DVB-S
ATV: PAL/SECAM/ NTSC
AV: PAL, NTSC
100 ~ 240 V AC 50/60 Hz
32": max. 55W
40": max. 74W
5 °C ~ +35 °C
-15 °C ~ +45 °C
0% ~ 89% RH, non-condensing
0% ~ 85% RH, non-condensing
32": 732.5 x 80.6 x 434.7 mm
40": 904.3 x 80.3 x 516 mm
32": 3.7 kg
40": 5.4 kg
17