Table of Contents
Advertisement
Problem
Possible cause and solution
The remote control
does not work
Switch ON the TV and check settings for automatic STBY function, by default the TV switches OFF after 4
after a certain time
NOTE:
If the problem persists after these solutions, please contact your local support centre or send a support mail via our
website www.strong-eu.com.
8.0 SPECIFICATIONS
Audio
Audio Output:
Video
DVB-T:
Input impedance:
Channel Bandwidth:
Modulation:
Video System:
Sound System:
System:
Connectors
1x ANT IN
1x SAT IN
2x HDMI
1x USB
1x S/PDIF (optical)
1x AV IN
1x COMMONINTERFACE (CI)
1x Headphones
1 x 12Volt DC IN
General Data
Power adaptor voltage:
Operating voltage:
Power consumption:
Operating temperature:
Storage temperature:
Operating humidity:
Storage humidity:
Dimensions (WxHxD) in mm:
Net-weight:
1. hange the batteries. If you're using rechargable ones take care to use such with low self-
discharge
2. The batteries are not installed correctly or the types have been mixed
3. IR Sensor is blocked or maybe interfered from bright light
2 W
Reception range: VHF (174MHz ~ 230MHz), UHF (474MHz ~ 862MHz)
75Ω
7MHz/8MHz
DVB-T: COFDM 2K/8K QPSK,16QAM,64QAM
DVB-S/S2: QPSK ,8PSK
DVB-T2: QPSK,16QAM,64QAM,256QAM
DVB-C: 16QAM, 32QAM, 64QAM, 128QAM, 256QAM
depth, 1920x1080@60fps
MPEG-1 layer 1/2
DTV: DVB-T2, DVB-S2, DVB-C, DVB-T, DVB-S
ATV: PAL/SECAM/ NTSC
AV: PAL, NTSC
180 ~ 240 V AC 50/60 Hz
12Volt / 4Ampere max.
SRT24HE4023: 45W / 50W
SRT24HE4023C: 45W / 48W
5 °C ~ +35 °C
-15 °C ~ +45 °C
0% ~ 80% RH, non-condensing
0% ~ 90% RH, non-condensing
SRT24HE4023: 552.9 x 144.1 x 369.7
SRT24HE4023C: 552.9 x 147.8 x 369
2.5 kg
16
Advertisement
Table of Contents
