Installing The Voip Gateway Card In The Pbx - Panasonic KX-TDA0484 Getting Started

Indication
LINK
DATA
3.1.2

Installing the VoIP Gateway Card in the PBX

Install the VoIP Gateway Card in a free slot of the KX-TDA100/KX-TDA200 PBX.
1.
Insert the card along the guide rails.
2.
Holding the card as shown below, push the release lever in the direction of the arrow so
that the card engages securely with the connector on the back board.
Release Lever
Colour
Link status indication
Green • ON: Normal connection
• OFF: Connection error
Data transmission indication
Green • ON: Data transmitting
• OFF: No data transmitted
Guide Rail
Description
Back Board
3.1 Installation
Getting Started 21