B1.2 Numbering Plan Example - Panasonic KX-TDA0484 Getting Started

B1.2 Numbering Plan Example
IP Addressing Information
The following table is a duplication of the table used for the PBX code method.
Card IP
Address
Default
Gateway
Address
Subnet Mask
Address
PBX Numbering Information
The following table contains "VoIP Gateway Trunk (CO Line) Access Number", instead of "PBX
Code" and "TIE Line Access Number" as used in the PBX code method.
VoIP Gateway
Trunk (CO
Line) Access
Number
PSTN Trunk
(CO Line)
Number
Extension
Number
Fax Extension
Number
Los Angeles Chicago
Office Office
200.45.11.35 199.176.64.41
200.45.11.1 199.176.64.1
255.255.255.0 255.255.255.0
Los Angeles Chicago
Office Office
802 803
92 93
200 to 299 300 to 399
500 to 599 600 to 699
B1 Extension Number Method
Description
Identifies the location of each VoIP Gateway
Card in the network during VoIP
communications. A unique IP address must
be assigned to each card.
Identifies the IP address of the primary
gateway (typically a router or similar device)
that exchanges IP packets with the other
gateways on the VoIP network.
Defines which digits of an IP address are
used for the network address and the host
address at each network location. A card IP
address must fall within the same subnet as
that of the default gateway (e.g., router) that
is connected to the card.
Description
An access number to seize a VoIP gateway
trunk (CO line).
An access number to seize a local PSTN
trunk (CO line).
A number assigned to each extension.
A number assigned to each fax extension.
Getting Started 63