Axiom CXL15A User Manual

Axiom CXL15A User Manual

Powered processed stage monitor

Advertisement

CXL15A
Powered Processed Stage Monitor
USER MANUAL
revision 2022-08-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CXL15A and is the answer not in the manual?

Questions and answers

Summary of Contents for Axiom CXL15A

  • Page 1 CXL15A Powered Processed Stage Monitor USER MANUAL revision 2022-08-01...
  • Page 2 IMPORTANT SAFETY INSTRUCTIONS Watch for these symbols: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to persons.
  • Page 3 FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
  • Page 4: Table Of Contents

    INTRODUCTION ......4 CXL15A PRESET RESPONSE ....7 TECHNICAL SPECIFICATION .
  • Page 5: Mechanical Drawing

    Coaxial Loudspeaker 15’’ woofer - 1” driver 98Z009396P-FI Polyimide diaphragm for 1” driver 95MET300216V Loudspeaker protection metal grid 99AXM300026 Axiom LOGO for metal grid 91DA900B DA900B Power amplifier module 91DSPKT12 DSP PCBA Input PCBA and Control PCBA (specify CXL15A model)
  • Page 6: I/O And Control Operations

    MAINS OUT - Powercon® NAC3FCB power output connector (grey). This is connected in parallel with the MAINS ~ / IN. The maximum load applicable depends on the mains voltage. With 230V~ we suggest to link a maximum of 4 CXL15A loudspeakers, with 120V~ we suggest to link a maximum of 2 CXL15A loudspeaker.
  • Page 7: Cxl15A Preset Response

    FOH LOW CUT This PRESET is the same as FOH but with a low cut at 110 Hz 48 dB/oct. To be selected when a CXL15A is used in combination with a subwoofer to form a main system or as FRONT FILL system. It can be used also in case you need to cut drastically the LF response.
  • Page 8 PROEL S.p.A. (World Headquarters) - Via alla Ruenia 37/43 - 64027 Sant’Omero (Te) - ITALY Tel: +39 0861 81241 Fax: +39 0861 887862 www.axiomproaudio.com...

Table of Contents