Safety - Husqvarna PE 10H Operator's Manual

meet CSA Z94.2-M 1984 requirements for class "A"
hearing protectors.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
General safety
WARNING:
instructions that follow before you use the
product.
WARNING:
protection against injury.
WARNING:
always be used together with the visor and
hearing protection specified in this manual
in order to work as intended. Visor must
always be folded down during operation.
• Use of this product does not decrease the need for
safe operation of the equipment.
• The protective equipment should only be used
for applications it is intended for. Consult your
supervisor, dealer or Husqvarna for advice if you
are unsure which kind of protective equipment is
required for the application in question.
• Use and save these instructions.
• The condition of the protective equipment should
be checked regularly. Damaged equipment should
always be replaced.
• Make sure the product is not impacted during
transportation and use.
• Speak to your servicing dealer if there is damage on
the product. If there is any doubt regarding whether
the product is fit for use, do not use.
1772 - 001 - 20.12.2022
Used if there is a risk of
Used if there is a risk of
Read the warning
No PPE can offer full
The chin guard must
V10 Visor: Tested according to ANSI/ISEA standard
Z87.1. Meets or exceeds OSHA regulations.

Safety

• Do not use the product longer than 5 years from
the production date. The production date is stated
on each system part of the product (helmet, visor,
hearing protection, chin guard). If the system parts
have different production dates, always refer to the
oldest date.
• Make sure that you know how to use the product
before use.
• Always ensure the protective equipment is properly
assembled, fitted and maintained according to the
manufacturer's instructions.
• The attention of users is also drawn to the danger of
modifying or removing any of the original component
parts of the helmet, other than as recommended
by the helmet manufacturer. Helmets should not be
adapted for the purpose of fitting attachments in any
way not recommended by the helmet manufacturer.
• Materials which may come into contact with the
wearer's skin is not known to cause an allergic
reaction. If a user anyway gets an allergic reaction,
stop wearing the product immediately and seek
professional advice.
• Do not apply paint, solvents, adhesives or
self-adhesive labels, except in accordance with
instructions from the helmet manufacturer.
• Do not use the equipment if it has been subject to
any contamination, alteration, or misuse that would
reduce the performance of the protector.
• Carefully read and follow all instructions and
warnings of the power cutter you are operating when
wearing the equipment. Make sure to fulfill needs
related to training and competence to operate the
power cutter in a safe way.
• Only use Husqvarna original spare parts.
• A protective helmet that shows signs of damage, e.g.
cracks or scratches, that might reduce its protective
capabilities, must be disposed of. The helmet should
also be disposed of if it has been involved in an
accident or incident, even if it does not have any
visual damage.
Safety instructions for helmet
WARNING:
protection against injury.
WARNING:
fulfilling release requirements specified in
EN 397:2012+A1:2012. The chin strap
releases at a force above 250 N.
• The helmet provides limited protection by reducing
the impact of force from small objects striking or
No PPE can offer full
The chin strap is not
7