Appearance - TP-Link Deco BE85 User Manual

Appearance

Each Deco has an LED that changes color according to its status, a WPS button, two 2.5 Gbps WAN/LAN ports, a 10 Gbps WAN/LAN port, a 10 Gbps
RJ45/SFP+ WAN/LAN Combo port, a USB 3.0 port, a power slot, and a Reset button.
See the explanation below:
Tip: The product label can be found at the bottom of the product.
Pulse Yellow:
Deco is resetting.
Solid Yellow:
Deco is starting up.
Pulse Blue:
Deco is ready for setup.
Solid Blue:
Deco is setting up.
Pulse Green:
Deco is upgrading firmware.
Solid Green:
Deco is all set up and connected.
Pulse Red:
The satellite Deco is disconnected
from the main Deco.
Solid Red:
Deco has an issue.
WPS Button
Press this WPS button, and immediately press the WPS button
on your client device to start the WPS process.
2× 2.5 Gbps WAN/LAN Ports
For connecting Deco to your modem, the Ethernet outlet, or for other internet services.
10 Gbps WAN/LAN Ports
For connecting Deco to your modem, the Ethernet outlet, or for other internet services.
10 Gbps RJ45/SFP+ WAN/LAN Combo Ports
Use Deco's Combo pair. The Combo pair includes an Ethernet port and an SFP+ port.
Only one port in the pair can be used at a time.
1× USB 3.0 Port
For connecting a USB storage device to Deco.
Power Slot
For connecting Deco to the power socket via the provided power adapter.
Reset Button
Press for 1 second and release to reset Deco to factory default settings. The light
changing from pulsing yellow to solid yellow indicated a successful reset.
2