Form Overlay Store ．．．．．．．．．．．．．．．．．．．．44 - Oki OKIPOS X400 Programming Manual

Command Structure <ESC>&
Example: See above
Placement: Must be preceded by all other data and placed just before the Stop
Default:
Command Function To store a label image in the volatile form overlay memory. Only one label
image may be stored in this memory area at a time.
Input to Printer
<ESC>A
<ESC>H100<ESC>V125
<ESC>STHIS IS THE STORED IMAGE WITH A BAR CODE
<ESC>H100<ESC>V165<ESC>B103100*12345*
<ESC>&<ESC>Z
Printer Output There is no output from this command. It stores the label image in the overlay
buffer.
Special Notes 1.
Remember that this storage is volatile. Therefore, if the printer loses power, the
overlay must be sent again.
2. The overlay is recalled using the <ESC>/ Form Overlay Recall command (see
page 43).
3. Form overlays do not have to be recompiled each time they are called to be
printed and therefore may result in much faster print output.
All manuals and user guides at all-guides.com
Form Overlay, Store
command (<ESC>Z).
None
44