Oki OKIPOS X400 Programming Manual page 25

<ESC>A
<ESC>H150<ESC>V100<ESC>L0505<ESC>K1H903F
<ESC>H350<ESC>V100<ESC>L1010<ESC>K1H903F
<ESC>Q1<ESC>Z
Printer Output
Special Notes 1.
When printing the custom character using the <ESC>K Recall command, the
character is affected by the following commands:
Character Expansion
Character Pitch
Line Feed
Rotate, Fixed Base Reference Point
Rotate, Moving Base Reference Point
2. The characters are stored in volatile memory and must be reloaded if the printer
power is lost.
3. Do not use ASCII <CR> or <LF> characters (carriage return or line feed) as
line delimiters within the graphic data or the actual image will not be printed as
specified.
All manuals and user guides at all-guides.com
23