Bernina activa 125 Service Manual page 2

Safety Regulations 1
Attention!
All electrical and electronic components operate at
dangerous voltages. The mains plug must be withdrawn
before making any adjustments to the machine.
Wait about 30 seconds after removing the plug (capacitor
discharge).
The service manual is intended to help with small repairs
and adjustments. The instructions lay no claim to comple-
teness. They are not suitable for a complete assembly or
disassembly procedure.
Important:
To enable the work described to be performed correctly,
the sewing machine must be in good mechanical and
electrical condition (running smoothly, properly oiled and
all plugs in position). When the adjustments are carried
out in the correct order, the machine will sew perfectly.
When doing any service on a machine always use the
original accessories that were delivered with the machine,
or were purchased afterwards. These are the following:
– Mains cable
– Foot control unit
– Buttonhole foot
– Bobbin case with bobbin
– Other accessories
This manual is copyrighted. It is given to the recipient
personally. Without our approval it is forbidden to
reproduce, publish or in any other form be distributed,
memorised on a magnetical, electronical, mechanical
system. Further, information to a third party without our
written approval is prohibited.
This manual is an ever changing document. The recipient
is responsible for updating the information which he will
receive from Fritz Gegauf Ltd. Switzerland.
Impressum
Author: P. Kenyon, V. Häseler
Layout conception: Melzer-Müller id, Kreuzlingen
Typesetting /DTP: Silvia Bartholdi
Print: Bodan AG, Kreuzlingen