Komatsu 730E Operation & Maintenance Manual page 164

Payload Meter III - Section 60 OM6009 8/11
Page 60-22
Creating Reports
Reports can be generated and viewed on-screen or
printed. These reports are generated from the query
displayed on the Payload Summary screen. From the
example in Sorting on Time Range, the report
printed would only contain data from truck 374 during
the month of July 2000, from 8:00 AM to 5:00 PM.
It is important to carefully select the query data and
click on "Query Database & Display" before printing a
report.
NOTE: Some haul cycles may contain the Sensor
Input warning flag. This indicates that one of the four
pressure sensors or inclinometer was not functioning
properly during the haul cycle. Haul cycles with this
warning are displayed in red on the Payload
Summary window and are not included in the
summary statistics for reports or display.
Summary (one-page report): A summary of the
queried data can be printed onto one page. The cycle
data is summarized onto one sheet. Displayed is the
speeds, cycle times, load statistics, frame and tire
data.
Detailed (multi-page report): The detailed report
starts with the summary report and follows with
pages of data for each haul cycle. The detailed report
prints date, time, payload, cycle times, and cycle
distances, speeds and the number of swing loads.