Cruise N Comfort HD Series Owner's Manual

Hide thumbs Also See for HD Series:

Turn the unit on by utilizing the included manual control or thermostat.

The Manual Control is very straightforward and consists of an on/oﬀ switch and a knob

that will adjust the blower speed. The manual control will give consistent operation as

long as the switch is in the on position.

If you purchased a thermostat control, set the mode on the thermostat to "Cool" and

adjust the temperature to a comfortable setting. The thermostat has delays in it to

prevent short cycling, so please give it 30 seconds to a couple minutes to react to

changes. Please consult the owner's manual for the thermostat as to the speciﬁcs of

operation of the thermostat.

HD Series

Owners Manual

Quick Start Guide

2.23.1

Table of Contents

Do you have a question about the HD Series and is the answer not in the manual?

Page 1 HD Series Owners Manual Quick Start Guide Turn the unit on by utilizing the included manual control or thermostat. The Manual Control is very straightforward and consists of an on/oﬀ switch and a knob that will adjust the blower speed. The manual control will give consistent operation as long as the switch is in the on position.
Page 2 • Current consumptions are nominal. The units can draw more in hot climates or when installed improperly, and they can draw less in cooler climates. • If unit shows sign of malfunction, please stop using the product immediately and call Cruise N Comfort USA right away at (855)899-1442.
Page 3 Do not add any leak sealants or unapproved leak dyes. Call Cruise N Comfort USA Tech Support for appropriate leak dye. Leaks in hoses or hose connections can be seen while unit is running by spraying a soapy water solution onto ﬁtting and checking for bubbles.
Page 4 Make sure no combustible objects are stored or used near the product. • Do not remove the cover of the Cruise N Comfort Air Conditioner in the event of a ﬁre. Do not use water to extinguish • ﬁres.Only use approved extinguishing agents instead.