Getting Started; Connection Methods - Sony CECH-2006A Instruction Manual

Getting started

Connection methods

HDMI OUT AV MULTI OUT
connector

If video is not displayed on the screen
If you change the type of cable used to connect the
system to a TV, video may not appear on the screen. If
video does not appear, turn off the system and then
turn it on again by pressing the power button for at
least five seconds (until the system beeps twice). The
video output setting will be reset and video will be
output at standard definition (SD) resolution.
 Connect your system to a TV
You can use any of the following methods to connect your system to a TV.
Video output in SD (Standard Definition) resolution
AV MULTI OUT
connector
connector
Video output in HD (High Definition) resolution - component video
AV MULTI OUT
connector
Video output in HD (High Definition) resolution - HDMI
HDMI OUT
connector
Hints
 For details about video output cable types and supported video modes, see "Video output on the
PS3™ system" (
 You can connect audio devices that support digital audio playback, such as an AV receiver for home
entertainment use. For details, see "Connecting digital audio devices" (
AV Cable
Component AV Cable
(sold separately)
HDMI Cable (sold separately)
page 16) and "Video output cable types"(
TV
VIDEO IN connector
TV
Component VIDEO IN
connector
TV
HDMI IN connector
page 17).
page 20).
EN
13