Table of Contents
Advertisement
Manual
00809-0100-4925
Following the configuration prompt, an additional prompt appears stating that a field
calibration is recommended. Refer to
Figure 3-24: Field Calibration Recommended screen
Unless one or more faults are present, the LOI will go to the Primary Variable screen,
displaying the gas type and current concentration being measured by the sensor.
Figure 3-25: Primary Variable Screen Using Methane
Note
If the operator removes and reapplies power to the transmitter without replacing the
sensor module, and no faults are present upon start-up, the display will go directly to the
Primary Variable screen following the Start-up screen.
Rosemount 925FGD
Calibration
options.
Installation
March 2023
31
Advertisement
Table of Contents
