Use & Tips - Brandt BFK099EBW Instruction Manual

USE & TIPS
User interface introduction
Connecting the power supply
About 3 seconds after connecting the appliance to the power supply, the freezer will be ready to set
the corresponding temperature.
Standby Function
If the function is active, approximately 30 seconds after the setting parameters have been entered, the
freezer continues to operate but the display screen goes out.
By pressing the① and ② buttons simultaneously for 5s, the activation of the standby function is
confirmed by the "ON" message on the display.
Then, by pressing the① and ② keys simultaneously for 5s, deactivation of the standby function is
confirmed by displaying the message "OFF" on the display screen.
Locking and unlocking
Once switched on, the keys are locked by default; it should work after unlocking.
Press the ① key for 3s, to lock or unlock the panel. The lock is automatically activated 30s after the
setting parameters are entered.