Use & Tips - Brandt BFU4251SW Instruction Manual

USE & TIPS
User interface introduction
Temperature Setting
• The temperature in the cabinet is controlled by the main control board, and the display
board shows the current gear and mode.
• There are five gears to choose from. The first gear has the highest set temperature and
the fifth gear has the lowest set temperature.
• User self setting mode: press the "setting" key, the LED gear indicator will flash, and
the gear can be adjusted at this time. Each time you press this key, the temperature
setting cycle will be gear 1, gear 2, gear 3, gear 4 and gear 5. After flashing for 5
seconds, it will be determined. Normally, gear 3 is recommended.
• SUPER freezing mode: press and hold the "setting" key for 3S to enter the SUPER
freezing mode, and the "super" indicator light is on;
• Press the "setting" key for 3S again to exit the quick freezing mode, and the "super"
indicator light goes out.
Ice cubes
This appliance can accept one or more ice cube trays for making ice cubes.
Freezing tips
To help you optimise the freezing process, here are some important tips:
• The maximum amount of food that you can freeze every 24 hours can be found on the ID
plate.
• The freezing process takes 24 hours. Do not add any more food to freeze during this time.
• Only freeze good quality, fresh and properly washed food.
• Prepare food in small portions to enable it to be rapidly and completely frozen and to make
it possible to subsequently thaw only the quantity required.
• Wrap up the food in aluminium foil or polyethylene food wraps which are airtight.
• Do not allow fresh, unfrozen food to touch the food which is already frozen to avoid raising
their temperature.
• Iced products, if consumed immediately after removal from the freezer compartment, may
cause frost burns to the skin.
• We recommend labelling and dating each frozen package.
• To obtain ice cubes faster, we recommend placing the ice cube trays in the top drawer.