INSTALLING SSD
This laptop fits a SATA 3.0 M.2 2280 SSD with
a maximum capacity of 1TB and is not
compatible with other sizes.
Ensure the laptop is turned off before installing
an external SSD (not supplied).
1. Flip the laptop over and remove the two
screws holding the SSD cover in place.
Remove the cover.
2. Place your SSD with the contacts facing
right. This is where the contacts of the
laptop are located. Slide the SSD to the
right to install.
3. Use the existing threading to screw the
SSD into place.
4. Place the cover back into position and
replace the screws removed from step 1.
Notes:
• Your SSD may be inserted with
either side facing up, however, only
one SSD orientation will function
correctly with the laptop. If you are
unable to detect your SSD with one
orientation, try to change the
orientation of the SSD to show the
other side.
• Be careful not to damage the
contacts.
Screws