Home Decorators Collection HDTD60VW Use And Care Manual page 7

Assembly (continued)
5
Backsplash Installation
To mount the backsplash (C) to the wall, apply a thin bead of silicone compound (not included) to the unpolished back side and bottom of
□
the backsplash (C). Position backsplash (C) as shown onto vanity top (A) and against the wall. Clean any excess silicone compound before
allowing to dry.
6
Hinge Adjustment For Door Alignment
If the doors preassembled to vanity base (B) require adjustment, follow the below options as needed:
□
To adjust door up or down, loosen screws (a), adjust door and retighten screws.
□
To adjust door left and right, turn screw (b) in or out.
□
□ To adjust door in and out, loosen screw (c), adjust door and retighten screw.
B
C
A
B
7
Silicone
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.