Operating The Product - Ryobi R18PPS120 Manual

≤60˚
≥15m
(50')

OPERATING THE PRODUCT

WARNING: Risk of electrocution! Do not
operate within 10 m of overhead electrical
power lines. Position the product at an angle
of 60° or less, depending on the specific
situation. Keep bystanders at least 15 m
away.
WARNING: Do not use the product on a
ladder or unstable support. Always cut with
both feet on solid ground to prevent being
pulled off-balance.
3
NOTE: To adjust the working length, unlock
1
the telescopic release latch. Adjust the length
of the extension pole to set the preferred
2
working length. Lock the telescopic release
latch to secure the extension pole.
1. Insert the battery pack.
2. Slide the trigger lock and squeeze the on/
off trigger.
1
2
1
2
11
Operation