Panasonic AJ-SPD850E Operating Instructions Manual page 55

Setup menus (continued)
USER menu <VIDEO>
No./Item
622 For setting 7.5% setup processing to be
performed on input and output signals
SETUP 25 in the DVCPRO (25 Mbps) mode.
(For AJ-SPD850P) When the STOP button is pressed,
operation is transferred to the sub-
screen, and the setup level is set for
each output. To return from the sub-
screen, press the STOP button again.
Note:
This setup menu is not displayed in the
625i system.
Sub-screen
00 This selects the 7.5% setup processing
for the input composite signal.
CMPST IN
0000 THRU :
The signal is recorded in its original
form.
0001 CUT :
The signal is recorded with the 7.5%
setup removed.
01 This selects the 7.5% setup processing
for the output composite signal.
CMPST OUT
0000 THRU :
The signal is output in its original form.
0001 ADD :
The signal is output with the 7.5%
setup added.
Note:
Bear in mind the setting for sub-screen
item No. 03 (CMPNT OUT) of setup
menu item No. 622 (SETUP 25).
02 This selects the 7.5% setup processing
for the input component signal.
CMPNT IN
0000 THRU :
The signal is recorded in its original form.
0001 CUT :
The signal is recorded with the 7.5%
setup removed.
03 This selects the 7.5% setup processing
for the output composite, component
CMPNT OUT and serial (digital) signal.
0000 THRU :
The signal is output in its original form.
0001 CUT :
The signal is output with the 7.5%
setup removed.
0002 ADD :
The signal is output with the 7.5%
setup added.
The underlined items indicates the initial setting.
Description No./Item
623 For setting 7.5% setup processing to be
performed on input and output signals
SETUP 50 in the DVCPRO50 (50 Mbps) mode.
(For AJ-SPD850P) When the STOP button is pressed,
operation is transferred to the sub-
screen, and the setup level is set for
each output. To return from the sub-
screen, press the STOP button again.
Note:
This setup menu is not displayed in the
625i system.
Sub-screen
00 This selects the 7.5% setup processing
for the input composite signal.
CMPST IN
0000 THRU :
The signal is recorded in its original
form.
0001 CUT :
The signal is recorded with the 7.5%
setup removed.
01 This selects the 7.5% setup processing
for the output composite signal.
CMPST OUT
0000 THRU :
The signal is output in its original form.
0001 ADD :
The signal is output with the 7.5%
setup added.
Note:
Bear in mind the setting for sub-screen
item No. 03 (CMPNT OUT) of setup
menu item No. 623 (SETUP 50).
02 This selects the 7.5% setup processing
for the input component signal.
CMPNT IN
0000 THRU :
The signal is recorded in its original form.
0001 CUT :
The signal is recorded with the 7.5%
setup removed.
03 This selects the 7.5% setup processing
for the output composite, component
CMPNT OUT and serial (digital) signal.
0000 THRU :
The signal is output in its original form.
0001 CUT :
The signal is output with the 7.5%
setup removed.
0002 ADD :
The signal is output with the 7.5%
setup added.
Description
55