Panasonic AJ-SPD850E Operating Instructions Manual page 49

Setup menus (continued)
USER menu <OPERATION>
No./Item
106 This selects the EE mode output
signals.
EE MODE SEL
0000 NORMAL :
Signals are output with a delay
equivalent to the length of internal
signal processing.
0001
Signals are output directly, without
internal processing, and so are output
with no delay.
Note:
When 1394 has been selected for the
video input signals or when INT SG has
been selected for video or audio, internal
operations are forcibly set to NORMAL.
This set the play delay time in frame
107
increments.
PLAY DELAY
0000
:
0015
112 This selects whether video input
switching using the INPUT SELECT
V IN SEL INH button is to be enabled or disabled.
0000 OFF :
Video input switching using the INPUT
SELECT button is enabled.
0001 ON :
Video input switching using the INPUT
SELECT button is disabled.
0002 REC :
Video input switching using the INPUT
SELECT button after the memory card
recorder has been transferred to a
recording mode is disabled.
The underlined items indicates the initial setting.
Description
THRU :
0
:
15
No./Item
113 This selects whether audio input
switching using the INPUT SELECT
A IN SEL INH button is to be enabled or disabled.
0000 OFF :
Audio input switching using the INPUT
SELECT button is enabled.
0001 ON :
Audio input switching using the INPUT
SELECT button is disabled.
0002 REC :
Audio input switching using the INPUT
SELECT button after the memory card
recorder has been transferred to a
recording mode is disabled.
Note:
Even when the ON or REC setting is
selected to disable audio input switching
using the INPUT SELECT button, it is
still possible to set the setup menu items
No. 715 (CH1 IN SEL), No. 716 (CH2 IN
SEL), No. 717 (CH3 IN SEL), No. 718
(CH4 IN SEL), No. 719 (D IN SEL12)
and No. 720 (D IN SEL34).
Description
49