Installing And Removing The M.2 Ssd Module - Gigabyte MZ73-LM0 User Manual

1-5

Installing and Removing the M.2 SSD Module

CAUTION
The position of the stand-off screw will depend on the size of the M.2 device. The stand-off screw
is pre-installed for 22110 cards as standard. Refer to the size of the M.2 device and change the
position of the stand-off screw accordingly.
Follow the steps below to install an optional M.2 SSD module on your motherboard:
Step1. Insert the M.2 SSD module into the slot.
Step2. Secure it with the screw, tightening as necessary to fasten the M.2 SSD module in place.
2
Hardware Installation
1
- 18 -