Panasonic KX-HNS104C Installation Manual page 15

R
1
1
3
Attach the sensor to the rear cover.
R Insert the grooves on the
Using the wall mounting adaptor
1
Remove the rear cover by
pressing the upper sides of the
cover (A) and then sliding it down
(B).
For assistance, visit www.panasonic.ca/english/support
PNQX7289YA_(en-en)_0907_ver.200.pdf
37 mm (1 15/32 inches)
2
UP
U P
sensor to the 4 tabs on the rear
cover, and then push down the
sensor.
U P
A
B
15
2
Attach the wall mounting adaptor
to the wall by using screws (
R Place the wall mounting
adaptor with "UP" mark facing
2
upwards.
R 21 mm (27/32 inches)
2
UP
1
1
3
Attach the sensor to the wall
mounting adaptor.
R Insert the grooves on the
sensor to the 4 tabs on the wall
mounting adaptor, and then
push down the sensor.
Setup
).
1
2
15
2015/09/07 16:13:55