Copying Your Tapes (Dubbing) - Panasonic PV-V4525S Operating Instructions Manual

Panasonic pv-v4525s: user guide
Hide thumbs Also See for PV-V4525S:
Table of Contents

Advertisement

Copying Your Tapes (Dubbing)

Connection
(Rear connection shown.)
VCR
(HiFi)
Connect VIDEO OUT jack on Playing VCR to VIDEO IN jack on Recording VCR.
1
To monitor the dubbing, also connect a TV as shown.
2
Connect AUDIO L/R OUT jacks on Playing VCR to AUDIO L/R IN jacks on Recording VCR.
In place of a Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit's Audio/Video outputs to the Recording VCR.
Playing (Source) VCR
1
Insert pre-recorded tape.
2
3
Press PLAY, then PAUSE/SLOW
immediately to enter PLAY/PAUSE mode.
4
Press PLAY to start dubbing.
Playing VCR starts playback.
5
Press STOP to stop dubbing.
To Monitor Dubbing on Your TV
1
Turn your TV on and tune to the Recording
VCR channel (CH3 or CH4).
2
Set the VCR/ TV Selector on the Recording
VCR to "VCR."
• Dubbing tapes protected with Copy
Note
Guard will have poor quality results.
Caution :
Unauthorized exchanging and/or copying of copyrighted recordings may be
copyright infringement.
*Important: If a remote control button does not work when pressed,
IN FROM ANT.
VIDEO OUT
R
L
AUDIO OUT
The operation of steps 4 and 5 must be done on both playing
and recording VCRs at the same time.
press the VCR button on the remote and try the button again.
VCR
(HiFi)
OUT TO TV
VIDEO IN
R
L
AUDIO IN
Front of VCR
Insert blank tape with record tab.
Press INPUT* to set VCR Input mode to LINE1
for Video Input (Rear) or to LINE2 for Video Input
(Front). (See "Selecting the Input Mode" below.)
Press REC, then PAUSE/SLOW immediately to
enter REC/PAUSE mode.
Press PAUSE/SLOW to start dubbing.
Recording VCR starts recording.
Press STOP to stop dubbing.
Selecting the Input Mode
Method 1:
Press INPUT repeatedly.
Channel Number ↔ ↔ ↔ ↔ ↔ LINE1 ↔ ↔ ↔ ↔ ↔ LINE2
Method 2:
Press CH
Display will change as below.
• "L1" or "L2" lights on Multi-Function Display
(about 4 sec.) when LINE1 or LINE2 is
selected.
• LINE1: For rear audio/video connection.
LINE2: For front audio/video connection.
- 9 -
R
L
VHF/UHF
VIDEO IN 2
(Front Audio L/R Video IN jacks
are also provided)
Recording (Editing) VCR
/
.
1
2
3
(CABLE)
LINE2
LINE1
125
TV
L-AUDIO IN2-R
(TV)
or
69

Advertisement

Table of Contents
loading

This manual is also suitable for:

V4525s

Table of Contents