Table of Contents
Advertisement
296
6-3. Do-it-yourself maintenance
■
After a fuse is replaced
●
If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. (P. 298)
●
If the replaced fuse blows again, have the vehicle inspected by any autho-
rized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
■
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
■
When replacing light bulbs
Toyota recommends that you use genuine Toyota products designed for this
vehicle. Because certain bulbs are connected to circuits designed to prevent
overload, non-genuine parts or parts not designed for this vehicle may be
unusable.
■
When reinstalling the cover (type C fuse box)
Left-hand drive vehicles
Reinstall the cover, and then hook the
rubber strip's groove onto the cover.
Right-hand drive vehicles
Reinstall the cover, and then hook the
rubber strip's groove onto the cover.
YARIS_GRMN_OM_Europe_OM52J40E
Advertisement
Table of Contents
