Kenwood PR18-1.2 Instruction Manual page 11

* C o n n e c t i o n of T e r r a l n a l on R e a r Panel
W h i l e p r e s s i n g on the s l i t p o r t i o n of the terminal"-' wl
an o r d i n a r y
( ' - ) s c r e w d r i v e r , I n s e r t the c o n n e c t i n g cable into
the round j u c k .
s c r e w d r i v e r . T h e
:
even after the s c r e w d r i v e r is
N O T E : When using stranded (twisted) c a b l e , the connector, s h o u l d
b e attached by s o l d e r i n g .
When insertion is c o m p l e t e , remove the
cable will remain locked into the terminal
r e m o v e d , '
4 0.4-1.0 (AWG26-18)
O.3~0,75«m( A W G 2 2 - 2 0 )
Push
13