Panasonic WORKIO DP-2310 Operating Instructions Manual page 51

Windows 98/Me
Details Tab
1. Print to the following port
Displays either the port where the printer is connected or the path to the network printer.
To change the printing destination, either select the printing destination port from the list or enter the
network path here.
2. /
Add Port...
Adds/deletes new port or new network path.
3. Print using the following driver
Displays the type of the printer driver. Specify the printer being used or a printer model which can be
emulated with the printer being used.
4. button
New Driver...
Updates or modifies the printer driver.
5.
Capture Printer Port...
Assigns a local port to the network connected printer or cancels a local port assigned to the network
printer.
6. Timeout settings - Not selected (For LPT Port only)
Specify the amount of time (in seconds) allowed to elapse before the printer comes online. If the printer is
not online within this duration, an error message will be displayed.
Continued on the next page...
Configuring the Printer Driver Settings
button
Delete Port...
/
End Capture...
button
51